Comfortable House

Fiberon, a leading manufacturer of composite decking, has created the ultimate marriage of beauty and durability with its new tropical hardwood colors for Horizon™ composite decking. These new colors have the dramatic wood tones of highly desirable tropical hardwood, and Fiberon offers the industry’s first 10-year Stain and Fade warranty, demonstrating the products ability to provide lasting beauty.

“This is hands down the best composite decking product I’ve ever seen,” said Tom Kraeutler, a nationally syndicated radio host for The Money Pit Home Improvement Radio Show (www.moneypit.com) and the Home Improvement Editor for AOL. “I’ve reviewed many composite decking products over the years and none have been able to achieve both the natural look and top performance of Fiberon’s Horizon.”

“This additional tropical hardwood look for Horizon decking represents the marriage of the highest beauty to the best performance, clearly demonstrating Fiberon’s commitment to bringing innovative products to the marketplace,” said Chris H. Beyer, Vice President of Marketing for Fiberon. “Homeowners are looking for products that are an extension of their home, raising their interest in the appearance of ipe or mahogany, but know they need an easy-to-maintain composite decking product. This perfectly provides that exotic look but with the best stain, fade, mold and scratch resistance in the wood alternative and composite decking category.”

Charged with creating the ultimate in beauty and long-lasting performance, Fiberon’s product development team united the exceptional stain-, fade-, mold- and scratch-resistant attributes of their leading Horizon composite decking, made possible through its PermaTech™ surface technology, with the multi-chromatic tropical hardwood look of its composite decking with stunning tropical colors.

Horizon is now available in two exotic hardwood colors, Ipe and Rosewood. Horizon decking will continue to be available in four solid colors, including Sand, Brick, Bronze and Slate. Boards can be ordered in square edge or grooved profiles. Grooved boards allow for the optional Phantom™ hidden fastener system for fastener-free deck surfaces.

Fiberon Horizon composite decking is sold to professional contractors and dealers through a national network of distributors. To learn more, visit www.fiberondecking.com, call 800-573-8841 or send an email to info@fibercomposites.com

About Fiberon

Fiberon is a leading manufacturer of composite and PVC decking, railing and fencing products used in homes and light commercial construction across North America. Part of the Fiber Composites, LLC family, the Fiberon brand product line is designed specifically for professional contractors. Fiberon’s polymer chemists and extrusion professionals employ the latest technology to constantly innovate, using the finest raw materials coupled with leading manufacturing processes to ensure best-in-class quality. The company was founded in 1997 and is privately owned with manufacturing operations in North Carolina and Idaho.

With so many available options for hardwood flooring, today’s busy and environmentally responsible consumer wants information – accurate information – to simplify the process of selecting a new hardwood floor.

Be a knowledgeable consumer and get the facts about U.S. hardwoods. They are “green,” exceptionally beautiful and can last a lifetime.” Here are some of the things you’ll want to know to make the right choice for hardwood flooring.

Know the Facts and Shop with Confidence

• A solid hardwood floor will provide decades of extraordinary beauty, durable service and flexibility. Remember, solid hardwood flooring can be refinished for changing tastes or excessive wear. It may initially cost a little more, but as trends evolve, it can too.
• Hardwood floors are non-toxic and trap no allergens such as mold spores and dust. Simple maintenance — dust mopping, sweeping or vacuuming — will keep hardwood floors looking great and allergen-free.
• U.S. hardwoods are truly sustainable. The US Forest Service, in a 2008 report, verified that the average annual net growth for hardwoods is greater than average annual removals. The volume of hardwood timberland in American forests is almost double that of 50 years ago.
• U.S. hardwoods are an all-natural, carbon-negative material. They have no emissions for methane, nitrogen oxides and other particulate matter and they are homegrown. Being regionally sourced further minimizes their carbon footprint.
• When considering a particular U.S. hardwood species, pay attention to its hardness rating scale, referred to as the Janka Scale. For high traffic areas, consider Oak, Maple, Cherry and Ash, species with higher hardness ratings.

Which One?

Pre-finished solid hardwood flooring is just that – already sanded and sealed, by the manufacturer, with at least four coats of ultraviolet-cured urethane resin. It offers consistent quality, quicker installation and immediate gratification, meaning you can walk on it as soon as it is laid. Time and money saved during the installation typically off-set the initial higher material cost.

Unfinished solid hardwood flooring must be sanded and sealed on-site. While it does offer more color choices, it requires extensive preparation. The sanding process is messy; significant drying time is required after each sealing application requiring up to five days for completion. While the initial material cost is lower, remember the additional finishing cost.

Engineered flooring, consisting of a plywood base that’s covered with a 1/16 to 1/8 inch thick layer of wood, works well in bathrooms and basements where light moisture might be a concern. It is almost always pre-finished. Because the top layer is so thin, it can’t be sanded more than one to three times and usually requires a professional to do it. Keep in mind that the less expensive choices cannot be sanded at all due to the very thin top layer.

Don’t be Misled by Lookalikes

The least expensive flooring option is laminate. It looks like wood, but it’s really a printed paper that is affixed to a wood-chip base or high-density fiberboard, covered with a clear surface layer to absorb daily impact. Its issue is that it can’t be repaired or sanded when scratches or dings occur.

Tropical woods, not native to the U.S., are being renamed and falsely marketed as favorite hardwoods. Be careful. Brazilian Cherry is jatoba and Chilean Cherry is lenga. Neither is Cherry. Tasmanian Oak and Australian Heritage Oak are eucalyptus, not Oak. Malaysian Oak is rubber wood and Australian Cypress is pine. When in doubt, visit www.HardwoodInfo.com to review the U.S. hardwood Species Guide.

Bamboo flooring is being called hardwood. It is not. Bamboo is a grass grown typically in tropical regions of the world and it is not carbon negative. To make flooring, the grass is glued together under tremendous pressures of up to 1,200 pounds per square inch. Glue content can range from three to 20 percent, and often contains urea formaldehyde, which is classified as a probable human carcinogen. Manufacturers approximate it could last only 30 years. And because it is typically manufactured in Southeast Asia, shipment to U.S. shores increases its carbon footprint, significantly. (See the attached chart for additional information)

As you contemplate your home improvement projects, make choices based upon the facts, not hype. Choose nature’s quintessential “green” material, U.S. hardwood, for flooring, furniture, mouldings, millwork and cabinetry that will last.

As homeowners increasingly desire greater comfort, enjoyment and control—especially in an economy that encourages cocooning—new technologies in home automation continue to emerge.

“Electrical contractors around the country are increasingly specifying, designing and installing home automation technologies and systems that can help lower energy costs in addition to enhancing lifestyle and appearance,” said John Maisel, publisher of Electrical Contractor magazine at www.ecmag.com, published by the National Electrical Contractors Association (NECA), Bethesda, Md.

According to a recent Electrical Contractor article, new and emerging residential innovations include:

• self-powered, wireless light switches that can be placed anywhere and moved anytime for a whole-house lighting control system—each battery-free switch houses a small “energy harvester” that converts mechanical energy at the flip of the switch into a radio signal that controls the home’s lights;
• wireless tabletop lighting keypads;
• new generations of solar tubes that capture, reflect and disperse UV-filtered sunlight;
• UL-approved dimmable outlets and plugs;
• wireless, motorized blinds and shades in combination with a an intelligent controller to reduce heat gain and fabric damage from UV rays;
• solar collection systems that integrate with the electric system to help save on energy and lower energy bills;
• wired and wireless fan speed controls;
• residential lighting that is thoroughly integrated into appliances and located closer to the task, replacing architectural downlights which needlessly illuminate the entire room;
• home offices with simple, direct/indirect lighting fixtures for computer areas;
• LEDs that can be easily mounted in areas otherwise considered off-limits, such as stairs; and
• wine displays highlighted with low-heat source LEDS without impacting wine aging.

According to Electrical Contractor, electric lighting control and motorized shade systems make the energy-saving benefits of daylight harvesting possible—including reduced maintenance and replacement costs over the home’s lifespan, energy conservation, improved occupant health, productivity and greater design flexibility.

Published by the National Electrical Contractors Association (NECA), Bethesda, Md., Electrical Contractor magazine reaches 85,000+ electrical contractors and more than 65,900 electrical contracting locations, more than any other industry publication. Telephone: (301) 657-3110. Web site: www.ecmag.com.

New innovations are allowing homeowners to create some of the most uniquely charming looks with siding. It used to be that having siding panels meant a home was destined to look like so many others, but today’s siding offers outstanding dimension and vibrancy through a wide spectrum of colors and various richly-textured profiles.

The siding from The Foundry^® is a new breed of premium vinyl siding that combines maintenance-free living with a bold color palette and the classic natural appeal of cedar shakes and shingles.

With more than 100 different molds from real cedar used to craft The Foundry’s Shake and Shingle panels, the authentic texture of handcrafted cedar shakes and mill-sawn shingles is achieved with random grain variations and detailed depth and dimension. While many home-building materials manufacturers try to replicate the appearance of wood, often falling short on aesthetics, The Foundry delivers a true representation of cedar with a seamless appearance and no noticeable pattern.

These panels provide the warmth and charm of cedar, while eliminating the maintenance that wood requires. Offered in the industry’s widest color palette, no painting, staining or sealing is ever needed with Foundry siding.

Rich texturing is taken to an exceptional level with The Foundry’s Weathered Collection, which is now being expanded to give homeowners even more color and texture options. The Weathered Collection’s coloring provides the uniquely beautiful look of cedar that has weathered over time. It is accomplished through a proprietary process that creates different tonal qualities using a darker shade of color in the grain, and a lighter one on higher points.

Crisp contrast is created within each Weathered Collection Shake or Shingle, but the grand effect for a home is a warm and variegated color field that is saturated with character.

In a whole-home application, these panels make an eye-catching statement on each side of the house. For additional texture and a personalized look, Weathered Collection panels can be combined with materials such as brick or fiber cement to bring unique appeal. Used with stone veneer, the Weathered Collection offers a home outstanding dimension with a timeless look. The Shingles and Shakes are a classic complementary fit for a stone wainscot or door surround.

As an accent in roof gables, the Weathered Collection provides additional architectural interest to draw gazes upward. The panels’ texturing can gain an even greater focus when set off by crisp trim designs, and posts or columns, creating elegantly detailed scenes.
A new introduction to the Weathered Collection’s palette is a true cedar color that features natural gold and brown tones, and undertones of subtle pinkish-red that add a hint of rose-colored blush. This authentic finish delivers rustic charm and warmth, and continues the Weathered Collection’s tradition of paying homage to nature through its range of light, medium and dark earth tones.

All Weathered Collection panels offer a 7″ exposure, while the Staggered Shake panels also have an available 10″ exposure that works to heighten its rugged design appeal vertically. Shingles have natural surfacing and random mill saw marks, Split Shakes are defined by peaks and grooves along the grain that create interesting shadows, and Staggered Shakes feature an uneven pattern and rough-sawn butt ends for a completely handcrafted appearance.

In addition to their style benefits, the panels have superior durability. An ASA cap maximizes color appearance, so while the panels look authentically weathered, their design and color will keep their integrity through Mother Nature’s storms and blistering sun. Foundry Shakes and Shingles are backed by a limited lifetime warranty.
The Foundry is a division of The Tapco Group™.

The winners of the 2009 Awards for Design Excellence (ADEX) have been announced, and Lightline^® door canopy products from Feeney, Inc. have been selected for the top level Platinum award. ADEX, sponsored by the international trade publication Design Journal, is the largest and most prestigious awards program for product design of furniture, fixtures and finishes marketed to the design trade. Every year a judging panel of professionals representing a cross section of the design industry selects the best product designs from a field of over 1,200 entries submitted by over 400 companies.

“We were thrilled to hear that the Lightline^® canopies had won a Platinum ADEX 2009 award, especially given the depth of the product entries,” said Del Leutbecher, Director of Business Development at Feeney, Inc. “Since it was first introduced in the United States, the Lightline^® product has inspired an incredibly enthusiastic response from the design and construction communities, and this award is a gratifying acknowledgement that we’re on the right track.”

Lightline^® canopy products are manufactured by Polymer Kunststoffe GmbH of Germany and distributed in the United States by Feeney Inc., Oakland, CA. These products have been widely used in Europe to shield people from the elements when they leave their homes or businesses. The manufacturer has taken an old concept of over-door canopies and awnings and created new, modern designs using innovative materials: stainless steel support arms, integrated aluminum gutters and UV resistant acrylic visor panels in a variety of finishes.

“Lightline^® canopy products require no custom design or one-off fabrication,” said Del Leutbecher. “Each canopy comes in an easy-to-assemble kit with all the hardware necessary to assemble and install; plus, a patented Click-Lock pane attachment feature makes installation a breeze without drilling holes through the acrylic visor panes. Simply insert the panes into the frame, lower the support arms, and snap the Click-Lock ends together. These canopies offer eye-catching designs that are easy to use, durable, low maintenance and sized to fit almost any standard doorway.”

Lightline^® canopies are available in a variety of styles. The Gable Canopy looks best on a pitched roof configuration; the rounded Arch Canopy works well with both modern and traditional designs; and the simple, versatile Curve Canopy complements virtually any doorway.

Kits also come in several standard widths ranging from 5 feet to 9 feet, and the Curve style even has an extended, multi-panel model that allows for continuous widths, a useful design for commercial storefronts.

For additional information on the ADEX award or Lightline^® canopies, please contact Andrew Penny or visit www.designjournalmag.com or www.lightlinecanopies.com. Detail drawings and 3-part specifications for the Lightline^® products are available for downloading from the website. Members of the media can get the latest news from Feeney at www.feeneyarchitectural.com/media