Comfortable House

As the green movement has infiltrated the home improvement sector, companies are continually developing more products and projects for you to “green” your home. A simple, budget-friendly project is incorporating a rain garden in your yard to help filter stormwater pollutants coming from your home.

A rain garden is typically located in a low-lying area in your yard. It collects rainwater and slowly filters it through the ground versus directly into storm sewers and local lakes and rivers. According to the U.S. Environmental Protection Agency (EPA), these gardens are an increasingly popular way to help reduce natural and human-made pollutants carried by rainfall or melted snow.

Benefits of Rain Gardens

No home renovations are providing 100 percent return on investment in today’s real estate market, according to the annual “2009 Cost vs. Value Report” conducted by Realtor Magazine and Remodeling. Therefore, it doesn’t make sense for homeowners to spend a lot of money on expensive remodeling projects. Instead, it’s a great time to consider low-cost, minor renovations, such as landscaping a rain garden.

“With a rain garden, homeowners not only beautify their property with plants, but are being environmentally friendly as well,” said Mark Munley, vice president of sales and marketing for Firestone Specialty Products. “They are also a source of food and shelter for birds and insects like dragonflies, which help eradicate pesky mosquitoes.”

Installing Your Rain Garden

To define a location for placement, you should first determine the end of your backyard’s existing drainage pattern. If the drainage pattern is not noticeable, note the course of runoff and areas where water collect after a storm. Choice locations to capture the most stormwater are close to downspouts from your roof, sump pump outlets or near paved driveways.

The EPA suggests a good “rule of thumb”, to determine the size of your rain garden, is to take 30 percent of the area which the garden will be collecting water from, whether that is a roof or driveway. Don’t be detoured from building a rain garden if you do not have enough space to accommodate the formulated size. A rain garden, no matter how small, can still help your local water resources.

According to Rain Gardens of West Michigan, an environmental education program focused on stormwater education, you should install your rain garden down-slope and at least 10 feet away from the building’s foundation to ensure it won’t build up too much water that can lead to leaks in your basement. “Many homeowners are installing an environmentally friendly liner under their rain gardens to give their homes the added protection they desire,” said Munley.

Adding a PondGard™ Rubber Liner from Firestone Specialty Products, Indianapolis, Ind., to the side of your garden that faces your home will minimize the risk to your foundation. PondGard Rubber Liners are formulated to be environmentally safe for plants and animals while remaining resistant to damaging aging conditions such as cracking and splitting, even in exposed applications. PondGard liners are available in a variety of sizes and conform to nearly any shape in order to fit many designs.

The next step is to start digging out your selected area creating a berm or slight walls, which helps contain the rain water. You will need to fill your rain garden with a substance that allows water to filter down to the liner. Choosing the right substance depends on the type of soil you have—sandy or silty soil or clay—but common fillers are loose gravel laid on the liner, followed by a layer of sand and topped with top soil. If desired, you can add mulch or peat moss to finish off the look.

You should test the amount of water your garden can potentially filter by filling it with water and seeing how long it takes to seep out. A typical rain garden should retain water for a few hours after rainfall. If your garden is not retaining enough water, add additional PondGard Rubber Liners to achieve your desired results.

According to the Low Impact Development Center, an organization funded by the National Fish and Wildlife Foundation, typical soil mixture should be washed, sharp sand; double-shredded, hardwood mulch; weed seed-free topsoil and peat moss.

Adding Your Personal Touch

Choosing the plants for your rain garden is a means to add a creative and colorful touch to your property. According to the Mid-America Regional Council and the EPA, native plants are recommended for their ability to thrive in their native climates. To guarantee your plants will flourish – water them everyday until maturity; at that point they should no longer require watering between rainfalls.

With the green movement in full swing, it is easier than ever to lessen your family’s impact on the environment. By installing an inexpensive rain garden with a PondGard Rubber Liner, you will directly decrease the amount of pollution your family home attributes into your local water resources. Also, check your local municipalities to see if they offer any incentives for installing a rain garden on your property.

For more information about Firestone PondGard Rubber Liners and to find your local distributor, please visit our Web site at www.firestonesp.com.

With more homeowners searching for ways to be environmentally-responsible, pocket doors are sustainability’s secret weapon. They consume no usable floor space and can be completely hidden away in the wall. In addition to maximizing floor space, they provide enhanced privacy and beautiful entries. Pocket doors allow builders and architects to design more energy-efficient, right-sized homes that deliver cost-savings and outstanding space utilization.

Homes with smaller footprints feature optimized living areas that consume fewer building materials and generate lower energy bills. With their smarter functionality, pocket doors are an effective, easy way to reduce a home’s carbon footprint.

With Johnson Hardware’s pocket door systems, homeowners can easily create improved door designs. It all starts with the pocket door’s space-saving utility. Where a traditional swinging door can require 8 – 10 sq. ft. of usable floor space, a pocket door takes none. Envision the additional usable floor space generated by replacing a dozen swinging doors with space-saving pocket doors. It could save 120 sq. ft. of floor space – that’s less to build, and less to heat and cool. Taking into account a value calculation of $150/sq. ft., the space-savings would equate to $18,000.

Having this additional usable floor space means families gain a place to put a needed bookshelf or lamp, favorite piece of artwork, vibrant flowering plant, or other desired furniture or furnishings. In terms of simple comfort, a pocket door makes a room seem roomier.

Pocket doors can also maximize open floor plans with their virtually limitless design potential. With Johnson Hardware’s heavy-duty pocket door frame, a homeowner could use doors that weigh up to 300 lbs. and have a maximum interior entry opening of 90 sq. ft. A doorway this size, using converging pocket doors, offers great traffic flow and versatility. One large room can seemingly be created out of two when the converging pocket doors are open. When not in use, rooms can be sectioned off to save on heating and cooling costs.

Pocket doors are also recognized for their universal design factor and benefits for aging in place. They are easier to access by those who use a wheelchair or a walker to assist with mobility. While a swinging door can be difficult to maneuver around, a pocket door that glides easily into the inside of the wall offers no obstacle. With wheelchairs requiring a larger doorway, these doors can be pushed and pulled easily, riding smoothly on Johnson Hardware’s jump-proof tracks and ball-bearing rollers. Johnson systems are designed to last a lifetime, using commercial-grade, three-wheel or four-wheel hangers. As residents age in place, the pocket doors will remain easy to operate with Johnson’s quality-tested and guaranteed components.

From high-density urban neighborhoods to new environmentally-conscious single-family homes and multi-family communities, building for optimal space needs is driving sustainable living. Pocket doors give homeowners the solution for the most usable space. In new construction, the Johnson pocket door frame is a fast installation for homebuilders. For existing homes, making a change to more efficient pocket doors is also an easy project. A remodeler or experienced do-it-yourselfer can install a Johnson pocket door frame in minutes, with just a few tools.

To learn more about Johnson Hardware and to see a full range of sustainable interior entry solutions, visit www.johnsonhardware.com or call 800-837-5664.