Posts Tagged ‘power’

New Home Automation Offers Greater Comfort—And Lowers Energy Costs

As homeowners increasingly desire greater comfort, enjoyment and control—especially in an economy that encourages cocooning—new technologies in home automation continue to emerge.

“Electrical contractors around the country are increasingly specifying, designing and installing home automation technologies and systems that can help lower energy costs in addition to enhancing lifestyle and appearance,” said John Maisel, publisher of Electrical Contractor magazine at www.ecmag.com, published by the National Electrical Contractors Association (NECA), Bethesda, Md.

According to a recent Electrical Contractor article, new and emerging residential innovations include:

  • self-powered, wireless light switches that can be placed anywhere and moved anytime for a whole-house lighting control system—each battery-free switch houses a small “energy harvester” that converts mechanical energy at the flip of the switch into a radio signal that controls the home’s lights;
  • wireless tabletop lighting keypads;
  • new generations of solar tubes that capture, reflect and disperse UV-filtered sunlight;
  • UL-approved dimmable outlets and plugs;
  • wireless, motorized blinds and shades in combination with a an intelligent controller to reduce heat gain and fabric damage from UV rays;
  • solar collection systems that integrate with the electric system to help save on energy and lower energy bills;
  • wired and wireless fan speed controls;
  • residential lighting that is thoroughly integrated into appliances and located closer to the task, replacing architectural downlights which needlessly illuminate the entire room;
  • home offices with simple, direct/indirect lighting fixtures for computer areas;
  • LEDs that can be easily mounted in areas otherwise considered off-limits, such as stairs; and
  • wine displays highlighted with low-heat source LEDS without impacting wine aging.

According to Electrical Contractor, electric lighting control and motorized shade systems make the energy-saving benefits of daylight harvesting possible—including reduced maintenance and replacement costs over the home’s lifespan, energy conservation, improved occupant health, productivity and greater design flexibility.

Published by the National Electrical Contractors Association (NECA), Bethesda, Md., Electrical Contractor magazine reaches 85,000+ electrical contractors and more than 65,900 electrical contracting locations, more than any other industry publication. Telephone: (301) 657-3110. Web site: www.ecmag.com.

Before Installing New Fencing, Get The Lay Of The Land

We rely on fences to serve an array of different purposes. They keep children and pets safe, offer privacy from nosy neighbors, transform yards into outdoor entertainment centers, and add beauty and value to property. Choosing the right fencing can be a bit perplexing when you see the myriad of fencing options available. However, as long as you know your landscape and stay focused on your purpose, you’ll be able to get off the fence and take action.

When fence-shopping, consider these ten factors before purchasing:

Stick to the mission. Once you know your goal–child safety, pet containment, privacy, entertainment, aesthetic enhancement, or multi-purpose–stick to the mission by picking fencing that best serves your goal. For safety, choose fencing with pickets close enough together so a child or dog can’t stick their head through and become trapped or strangled. For privacy or noise reduction, choose a taller, solid fence.

Know the lay of your land. Know your landscapes intimately–their hills, valleys, and slopes–no matter how small. They can cause big installation problems and impact your fence’s appearance. For yards with many ups and downs, avoid disasters by using stair-stepped fencing, which ensures a level fence.

Ditch the high maintenance. Wooden fences are charming until they weather, warp, and rot from the elements or lack of diligent annual maintenance. Wood requires frequent sealing to keep it viable. Vinyl or virgin vinyl (non-recycled) fencing withstands harsh elements and offers carefree maintenance. Extremely durable, vinyl requires only occasional power-washing. Choose vinyl containing titanium dioxide (TI02) to prevent UV damage. An example is Triple Crown™ Fence manufactured by Royal Outdoor Products, a pioneer in vinyl fencing, since 1982. Our new Triple Crown™ Signature Series provides a rich, wood-grain texture for a natural wood appearance with the convenience of vinyl.

Know your posts and gates. All fences require posts. For vinyl posts, thicker may be better, but beware–some companies use foaming agents to boost wall thickness without boosting strength. Choose vinyl posts with wall thickness in the .135 to .150 range. If you need gates, remember that steel reinforcement inside the gate hinge-posts is key; most gates are too heavy for vinyl alone to accommodate.

Consider your climate. In frosty, northern climates, use concrete to anchor fence posts. Planting posts 36-inches into the ground prevents heaving during cold snaps. In humid, rainy areas, wood is more susceptible to water damage, so vinyl is a better choice. High quality vinyl fencing, such as Royal Outdoor Products’ complete Triple Crown Fence line and Triple Crown Signature Series, won’t blister, peel, crack, or turn brittle, even when installed in extreme hot or cold climates.

Don’t reinvent the fence. While do-it-yourself fencing is popular, the results are often surprising (not in a good way). Installing fencing is no walk in the park. Get professional help. Enlist a fencing contractor before purchasing anything. The results are worth the cost.

The proof is in the fencing. Check out a company’s installations in person. Reputable companies often have customer sites where you can see completed fences firsthand.

Get neighbors on board. Make sure your fence doesn’t block your neighbors’ view. As a courtesy, talk to them before choosing fencing, so you don’t wind up feuding later. Getting the neighbor’s input can make them more agreeable to whatever fencing design you ultimately choose.

Don’t zone out on building codes. Check with your municipality about local zoning ordinances and building codes. Your fencing project may require a permit.

Know your warranty rights. A limited lifetime warranty is common for fencing. But warranties typically only protect against structural failure, so unless your fencing collapses, you can’t make a claim. For added protection, get an installation warranty from your contractor.

For more information on fence planning, contact: Royal Outdoor Products, P.O. Box 360, Milford, IN 46542-0360. Phone: 1-800-488-5245. Fax: 1-877-725-3325. Web Site: www.royaloutdoor.com.

Royal Outdoor Products offers a complete package of vinyl deck, fencing, railing systems, columns and full trim which can be custom configured to suit all style applications.

The Joy Of Clean, Well-Dressed Windows

Few home projects do more to enhance the overall beauty of family homes than clean, sparkling, windows. Although generally affordable, easy enough to perform, and requiring little in the way of materials, the window-washing project is perhaps the easiest chore to put off for another day. Here are some suggestions for maintaining classy glass inside and outside your home:

Organize the scope of the project and the options for getting it done. How many windows? How often would you like to have them cleaned? What are the options for getting the job done?

If you live in old three-story house with 92 windows, the options are fairly straight forward. You can ask the local window cleaning service for a quantity break, or divide the windows by the number of week’s year, and then tackle them at a rate of two or three each week. A third option involves renting a scissor lift at your local home store annually or semi-annually to make the outside part of the job as safe as possible.

New houses with even large numbers of windows often have the advantage of lift out panels that can be quickly cleaned and replaced. Again, a workable schedule can be a big help if you plan to do it yourself. Professional window cleaner’s can do the job for less than you probably imagine when working on a continuing contract.

Outside windows suffering from long-term neglect may challenge the skills of professional or do-it-yourself window cleaners, but are clearly worth the extra effort.

Materials:

Window cleaners come in all sizes and shapes. Spray-ons are perfect for a quick clean up with no muss or fuss. Vinegar water and steam cleaning are favorites for removing residue from past cleaner formulas. Also, there are commercial products that can be power sprayed onto outside windows. Be careful about power spraying in areas that might cause paint peel in nearby trim.

For the really dirty outside windows your will want to try a commercial window-cleaning solution or strong sudsy-ammonia solution in hot water. It can be applied with a padded telescoping applicator or brush, and removed with a rubber squeegee from ground level or from a platform ladder. Rinsing will prevent the dull film that sometimes follows heavy-duty use of cleaners.

Window Dressings:

Curtains, drapery, cornices and blinds can change the look of a room dramatically. While wide wooden slats blinds can make rooms on the sunny side of the house habitable, reducing glare and helping to control the room temperature, sheer curtains or sheer drapery let in the sunlight for fully brightened rooms, and open the possibilities for a full spectrum of color. Likewise, matching blinds, whether vertical of horizontal unify large rooms and give an orderly look inside and out.