Comfortable House

Fiberon, a leading manufacturer of composite decking, has created the ultimate marriage of beauty and durability with its new tropical hardwood colors for Horizon™ composite decking. These new colors have the dramatic wood tones of highly desirable tropical hardwood, and Fiberon offers the industry’s first 10-year Stain and Fade warranty, demonstrating the products ability to provide lasting beauty.

“This is hands down the best composite decking product I’ve ever seen,” said Tom Kraeutler, a nationally syndicated radio host for The Money Pit Home Improvement Radio Show (www.moneypit.com) and the Home Improvement Editor for AOL. “I’ve reviewed many composite decking products over the years and none have been able to achieve both the natural look and top performance of Fiberon’s Horizon.”

“This additional tropical hardwood look for Horizon decking represents the marriage of the highest beauty to the best performance, clearly demonstrating Fiberon’s commitment to bringing innovative products to the marketplace,” said Chris H. Beyer, Vice President of Marketing for Fiberon. “Homeowners are looking for products that are an extension of their home, raising their interest in the appearance of ipe or mahogany, but know they need an easy-to-maintain composite decking product. This perfectly provides that exotic look but with the best stain, fade, mold and scratch resistance in the wood alternative and composite decking category.”

Charged with creating the ultimate in beauty and long-lasting performance, Fiberon’s product development team united the exceptional stain-, fade-, mold- and scratch-resistant attributes of their leading Horizon composite decking, made possible through its PermaTech™ surface technology, with the multi-chromatic tropical hardwood look of its composite decking with stunning tropical colors.

Horizon is now available in two exotic hardwood colors, Ipe and Rosewood. Horizon decking will continue to be available in four solid colors, including Sand, Brick, Bronze and Slate. Boards can be ordered in square edge or grooved profiles. Grooved boards allow for the optional Phantom™ hidden fastener system for fastener-free deck surfaces.

Fiberon Horizon composite decking is sold to professional contractors and dealers through a national network of distributors. To learn more, visit www.fiberondecking.com, call 800-573-8841 or send an email to info@fibercomposites.com

About Fiberon

Fiberon is a leading manufacturer of composite and PVC decking, railing and fencing products used in homes and light commercial construction across North America. Part of the Fiber Composites, LLC family, the Fiberon brand product line is designed specifically for professional contractors. Fiberon’s polymer chemists and extrusion professionals employ the latest technology to constantly innovate, using the finest raw materials coupled with leading manufacturing processes to ensure best-in-class quality. The company was founded in 1997 and is privately owned with manufacturing operations in North Carolina and Idaho.

With so many available options for hardwood flooring, today’s busy and environmentally responsible consumer wants information – accurate information – to simplify the process of selecting a new hardwood floor.

Be a knowledgeable consumer and get the facts about U.S. hardwoods. They are “green,” exceptionally beautiful and can last a lifetime.” Here are some of the things you’ll want to know to make the right choice for hardwood flooring.

Know the Facts and Shop with Confidence

• A solid hardwood floor will provide decades of extraordinary beauty, durable service and flexibility. Remember, solid hardwood flooring can be refinished for changing tastes or excessive wear. It may initially cost a little more, but as trends evolve, it can too.
• Hardwood floors are non-toxic and trap no allergens such as mold spores and dust. Simple maintenance — dust mopping, sweeping or vacuuming — will keep hardwood floors looking great and allergen-free.
• U.S. hardwoods are truly sustainable. The US Forest Service, in a 2008 report, verified that the average annual net growth for hardwoods is greater than average annual removals. The volume of hardwood timberland in American forests is almost double that of 50 years ago.
• U.S. hardwoods are an all-natural, carbon-negative material. They have no emissions for methane, nitrogen oxides and other particulate matter and they are homegrown. Being regionally sourced further minimizes their carbon footprint.
• When considering a particular U.S. hardwood species, pay attention to its hardness rating scale, referred to as the Janka Scale. For high traffic areas, consider Oak, Maple, Cherry and Ash, species with higher hardness ratings.

Which One?

Pre-finished solid hardwood flooring is just that – already sanded and sealed, by the manufacturer, with at least four coats of ultraviolet-cured urethane resin. It offers consistent quality, quicker installation and immediate gratification, meaning you can walk on it as soon as it is laid. Time and money saved during the installation typically off-set the initial higher material cost.

Unfinished solid hardwood flooring must be sanded and sealed on-site. While it does offer more color choices, it requires extensive preparation. The sanding process is messy; significant drying time is required after each sealing application requiring up to five days for completion. While the initial material cost is lower, remember the additional finishing cost.

Engineered flooring, consisting of a plywood base that’s covered with a 1/16 to 1/8 inch thick layer of wood, works well in bathrooms and basements where light moisture might be a concern. It is almost always pre-finished. Because the top layer is so thin, it can’t be sanded more than one to three times and usually requires a professional to do it. Keep in mind that the less expensive choices cannot be sanded at all due to the very thin top layer.

Don’t be Misled by Lookalikes

The least expensive flooring option is laminate. It looks like wood, but it’s really a printed paper that is affixed to a wood-chip base or high-density fiberboard, covered with a clear surface layer to absorb daily impact. Its issue is that it can’t be repaired or sanded when scratches or dings occur.

Tropical woods, not native to the U.S., are being renamed and falsely marketed as favorite hardwoods. Be careful. Brazilian Cherry is jatoba and Chilean Cherry is lenga. Neither is Cherry. Tasmanian Oak and Australian Heritage Oak are eucalyptus, not Oak. Malaysian Oak is rubber wood and Australian Cypress is pine. When in doubt, visit www.HardwoodInfo.com to review the U.S. hardwood Species Guide.

Bamboo flooring is being called hardwood. It is not. Bamboo is a grass grown typically in tropical regions of the world and it is not carbon negative. To make flooring, the grass is glued together under tremendous pressures of up to 1,200 pounds per square inch. Glue content can range from three to 20 percent, and often contains urea formaldehyde, which is classified as a probable human carcinogen. Manufacturers approximate it could last only 30 years. And because it is typically manufactured in Southeast Asia, shipment to U.S. shores increases its carbon footprint, significantly. (See the attached chart for additional information)

As you contemplate your home improvement projects, make choices based upon the facts, not hype. Choose nature’s quintessential “green” material, U.S. hardwood, for flooring, furniture, mouldings, millwork and cabinetry that will last.

As homeowners increasingly desire greater comfort, enjoyment and control—especially in an economy that encourages cocooning—new technologies in home automation continue to emerge.

“Electrical contractors around the country are increasingly specifying, designing and installing home automation technologies and systems that can help lower energy costs in addition to enhancing lifestyle and appearance,” said John Maisel, publisher of Electrical Contractor magazine at www.ecmag.com, published by the National Electrical Contractors Association (NECA), Bethesda, Md.

According to a recent Electrical Contractor article, new and emerging residential innovations include:

• self-powered, wireless light switches that can be placed anywhere and moved anytime for a whole-house lighting control system—each battery-free switch houses a small “energy harvester” that converts mechanical energy at the flip of the switch into a radio signal that controls the home’s lights;
• wireless tabletop lighting keypads;
• new generations of solar tubes that capture, reflect and disperse UV-filtered sunlight;
• UL-approved dimmable outlets and plugs;
• wireless, motorized blinds and shades in combination with a an intelligent controller to reduce heat gain and fabric damage from UV rays;
• solar collection systems that integrate with the electric system to help save on energy and lower energy bills;
• wired and wireless fan speed controls;
• residential lighting that is thoroughly integrated into appliances and located closer to the task, replacing architectural downlights which needlessly illuminate the entire room;
• home offices with simple, direct/indirect lighting fixtures for computer areas;
• LEDs that can be easily mounted in areas otherwise considered off-limits, such as stairs; and
• wine displays highlighted with low-heat source LEDS without impacting wine aging.

According to Electrical Contractor, electric lighting control and motorized shade systems make the energy-saving benefits of daylight harvesting possible—including reduced maintenance and replacement costs over the home’s lifespan, energy conservation, improved occupant health, productivity and greater design flexibility.

Published by the National Electrical Contractors Association (NECA), Bethesda, Md., Electrical Contractor magazine reaches 85,000+ electrical contractors and more than 65,900 electrical contracting locations, more than any other industry publication. Telephone: (301) 657-3110. Web site: www.ecmag.com.